Aztec

Aztec is a superior brand of self-adhesive laminates manufactured exclusively for the AIMS Group.

• Outstanding quality of face papers
• Variety of proven adhesive formulations
• Excellent release papers
• One of the most stable laminates currently available
• All the adhesives are acrylic-based compounds (no solvents are present)
• Unprinted backing paper to allow for printed images where required
• Split-back products have precision splits every 38mm

• The surface/application the eventual self-adhesive label is destined for MUST be taken into consideration when selecting a self-adhesive stock for printing. It is VITAL the eventual surface the label is being applied to is known so that the merchant can recommend the appropriate adhesive type.
• Ideally a sample should be tested on the surface first. Even relatively good surfaces such as glass or steel, may be coated with agents to prevent scuffing or erosion: these agents can impair the performance of many self-adhesives.
• Plastics are often problematic surfaces for self-adhesive labels, because they may be contaminated with release agents used during their manufacture: they may even be prone to gassing which will inevitable impair self-adhesive performance.
• Brown corrugated packaging often has particularly challenging surfaces: they are typically rough and as such will reduce the contact area between the adhesive and the surface. Additionally, brown packaging is invariably made from recycled materials which often contain plastic or silicon residues which again will detrimentally affect the performance of a self-adhesive.
• Removable adhesives should ideally be tested for as long as possible under service conditions to ensure the surface the label is applied to does not have a coating/surface treatment which will affect the ‘removability’ of the label.
• The Aztec range contains a variety of adhesives to cater for most surfaces, applications and operating conditions: permanent, supertack, supertack plus, permanent deep freeze, removable, permanent for plastics, water removable, permanent for wet surfaces etc. If in anydoubt, please consult your merchant

The relative ease customers now experience in printing and finishing self-adhesive laminates belies the fact that these are very complex products comprising a face paper, a soft adhesive coating, a silicone coating and a robust backing paper. All four components can react very differently in any given environment, therefore we recommend that the following guidelines are adhered to wherever possible:

• Guillotine clamp pressure should be set at the minimum level
• Stack heights must not exceed 60-80mm on paper grades and 30-40mm on filmic grades
• The newer the guillotine blade the better
• Ensure the guillotine blade is always kept clean: use a suitable solvent to regularly remove any adhesive residue and ALWAYS apply a layer of silicone spray after cleaning.
• All split back products have splits 38mm apart running in the grain direction.
  Most Aztec laminates are laser compatible but we recommend you trial first.
• Never leave any stack of self-adhesive laminates unwrapped and exposed to the environment: always wrap & protect between processes.
• Storage temperatures should never exceed 35°C or fall below 5°C.
• Avoid any exposure to direct sunlight or heat sources such as radiators.
• Ensure the material is at press room temperature PRIOR to opening the wrappers.
• Ideal printing conditions are 50-55 % RH @ 18- 23°C.
• Always ensure the surface the label is to be affixed to is clean and dust free. To apply the label, peel the backing away and then press the face material firmly across the whole area of the label

Solvents were a primary component when self-adhesive laminates were first developed: they were used in the adhesive and release compound formulations. However, Aztec self-adhesives are made without the use of solvents and employ acrylic based compounds to completely avoid the use of hazardous and environmentally unfriendly solvents.

All Aztec face papers are made from papers derived from certified wood products and are chlorine free.

Aztec products are BGVV and FDA approved for indirect contact with foodstuffs.

The deep freeze permanent adhesive is approved for direct contact with foodstuffs.

Aztec products are certified under EN71Pt3 – Safety of Toys.

The polypropylene films available in the Aztec range are recyclable and do not contain chlorine or plasticisers.

The Aztec range is under constant development and if you cannot see a product that you require please ask your local AIMS member. With short lead times and low making quantities, Aztec should be able to provide a quality solution for your adhesive requirements.